hiuhyi - PHP Online

Form of PHP Sandbox

Enter Your PHP code here for testing/debugging in the Online PHP Sandbox. As in the usual PHP files, you can also add HTML, but do not forget to add the tag <?php in the places where the PHP script should be executed.



Your result can be seen below.

Result of php executing





Full code of hiuhyi.php

  1. /*
  2.   Blink
  3.  
  4.   Turns an LED on for one second, then off for one second, repeatedly.
  5.  
  6.   Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
  7.   it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
  8.   the correct LED pin independent of which board is used.
  9.   If you want to know what pin the on-board LED is connected to on your Arduino
  10.   model, check the Technical Specs of your board at:
  11.   https://www.arduino.cc/en/Main/Products
  12.  
  13.   modified 8 May 2014
  14.   by Scott Fitzgerald
  15.   modified 2 Sep 2016
  16.   by Arturo Guadalupi
  17.   modified 8 Sep 2016
  18.   by Colby Newman
  19.  
  20.   This example code is in the public domain.
  21.  
  22.   https://www.arduino.cc/en/Tutorial/BuiltInExamples/Blink
  23. */
  24.  
  25. // the setup function runs once when you press reset or power the board
  26. void setup() {
  27.   // initialize digital pin LED_BUILTIN as an output.
  28.   pinMode(LED_BUILTIN, OUTPUT);
  29. }
  30.  
  31. // the loop function runs over and over again forever
  32. void loop() {
  33.   digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  34.   delay(1000);                       // wait for a second
  35.   digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  36.   delay(1000);                       // wait for a second
  37. }
  38.  
File Description
  • hiuhyi
  • PHP Code
  • 18 Jan-2023
  • 1.21 Kb
You can Share it: